![[personal profile]](https://www.dreamwidth.org/img/silk/identity/user.png){kind=small}
Decorative heater grate
Everything you need for a perfect date night... movie tickets and lube
PINKY!
Goat face
Horns are tasty!
Closeup of a katydid
Looks like Disney has gotten into the adult novelty business.
This picture of a metal roof makes my eyes go all woogey.
Just taking a break
And here I've been giving hugs away for free like an idiot.
Valve math fail
They showed me the Car Fox
Now there is a vehicle with ground clearance!
I love this license plate!
LiveJournal really messed up the gallery. It's a royal pain in the ass to upload and post images now. Clicky on any of these to see the full image.
Macrophotograph of a screw.
Storms in the distance, and the water tower that was recently erected nearby.
I wish this bike helmet came in my size.
A couple toads I saw in a well head while looking at houses with a friend.
This show is boring!
Cool story, bro.
THIS IS OFFICEMAX!!!!
Something every Skyrim fan should have.
This tastes like ass.
Mmmmm... Hooves....
I ordered a pork tenderloin sandwich from a local diner. This is what I got.
Macrophotograph of a screw.
Storms in the distance, and the water tower that was recently erected nearby.
I wish this bike helmet came in my size.
A couple toads I saw in a well head while looking at houses with a friend.
This show is boring!
Cool story, bro.
THIS IS OFFICEMAX!!!!
Something every Skyrim fan should have.
This tastes like ass.
Mmmmm... Hooves....
I ordered a pork tenderloin sandwich from a local diner. This is what I got.
RIP Ruthven, Oct 8, 2011-July 3, 2012
Jul. 3rd, 2012 11:21 amLittle Ruthven passed away today in his surrogate mama's arms. He was just a few days short of nine months old. His mother died shortly after giving birth to him, so my SO and I raised him. He was very affectionate and curious about everything. He was absolutely fearless, and would just walk into the house like he owned the place if given half a chance.
We noticed he wasn't feeling well a couple days ago when he didn't come running when I went outside. We found him under a tree by himself. He seemed to be eating and drinking normally. The next day he wasn't doing any better so we moved him to the deck and set up an umbrella for shade. This morning he was clearly in pain, so my SO started holding him like when he was a baby. He passed away in his mama's arms before we could call the vet.
We buried him in the barnyard, not far from his mother. He will be missed.
We noticed he wasn't feeling well a couple days ago when he didn't come running when I went outside. We found him under a tree by himself. He seemed to be eating and drinking normally. The next day he wasn't doing any better so we moved him to the deck and set up an umbrella for shade. This morning he was clearly in pain, so my SO started holding him like when he was a baby. He passed away in his mama's arms before we could call the vet.
We buried him in the barnyard, not far from his mother. He will be missed.
There is no Peter, only Zuul.
May. 10th, 2012 07:11 pmThe old gate to the barnyard here was in pretty sorry shape. The wood was pretty much rotten, particularly around the hinges. The outer screws holding the hinge had ripped through the wood and the heavy gauge metal had bent 90 degrees from the weight of the door. It was just barely hanging on, and it was very difficult to open or close. Any pretense of a latch had long rotted away.
I resolved to make a new gate. A better gate. A gate that would last forever. Or at least, for as long as the property owner lives.
The original gate was made with a frame of four 2x6s of unknown wood, with a fifth 2x6 as a diagonal brace and 1x6 slats filling the center. The whole thing was put together with nails and it had two hinges, held in place with fairly small lag screws.
My initial plan was to build a gate with four vertical and five horizontal pieces of 2x6 pressure treated lumber, with 4 hinges, the whole thing held together with coated Torx-head deck screws 3-1/2 inches in length. But when I got the initial frame assembled, I found it weighed a ton, and that was just 4 of the 9 boards. A quick Google search and some calculations gave a finished weight of over 175 pounds! Eliminating any of the horizontal boards would have left a large gap in the middle.
Then I noticed we had some wire frame panels. I picked through them and found there was one that almost perfectly matched the size of the frame. So I went with a frame of three vertical and three horizontal members, leaving four large holes. I then placed the wire panel over the middle and attached with with screws and metal strapping. I could have used staples like a normal person, but I prefer screws. The wire panel stuck up over the top of the gate by about 4 inches.
Some quick math and I came up with a finished weight of just 125 pounds, well within the 150 pound rating for each individual hinge. Because the gate had only 3 horizontal members, I could only use 3 hinges, but that's still way more than enough, and half again as much as the old gate.
Old gate hanging precariously behind the finished new gate.
I intentionally made the new gate slightly longer than the opening, so it would close against the posts on either side, which is much stronger than a gate that can swing either way. My initial plan was to have it open inwards, which would make it impossible for the animals to push it open, no matter how hard they hit it, but the ground was too uneven in the barnyard. So I had to hang it so it swung outwards. But this presented a new challenge, the hinges were now on the wrong side of the gate! The solution was simple, I just flipped the gate over. This placed the overhanging wire underneath the gate now, which led to my next problem.
I over-compensated for the wire and installed the hinges on the post too high, leaving a sizable gap underneath. While none of our current goats could get under it, it would be simple for baby goats, and the gap might encourage the dogs to try digging underneath. So I got some 1x4s and 1x2s from the garage and built another, lightweight frame underneath. I'm not sure what the 1x4s were, but the 1x2s are cedar. I held them in place with lots of screws.
Yes, the wire fence is distorted in one area, but it's cosmetic only and doesn't affect its structural integrity. It was the only piece that was the perfect size, anything else would have been too small or required extensive cutting.
The finished gate has 3 heavy-duty hinges attached to the gate with 5/8" carriage bolts and washers, and I put metal straps on the edges of the wood to prevent it from ever ripping out, the larger plates held in place with massive lag screws.
I would have preferred the gate open inwards, which would have made it nearly infinitely strong to resist animals inside the barnyard, so since it had to open outwards, I installed a heavy-duty latch. The loop goes through a 6x6 post and is secured with washers and nuts, while the hook end has 4 bolts, washers and nuts (I'm actually short one bolt at the moment, so it's only got a screw right now). The latch is self-locking and should be nearly impossible for the animals to manipulate with their horns. I may try getting a metal plate or something to reinforce the hook side. For now, this is the weakest point on the gate.
My roommate took one look at it and said, "I think you overengineered this."
Yeah, I do that.
I resolved to make a new gate. A better gate. A gate that would last forever. Or at least, for as long as the property owner lives.
The original gate was made with a frame of four 2x6s of unknown wood, with a fifth 2x6 as a diagonal brace and 1x6 slats filling the center. The whole thing was put together with nails and it had two hinges, held in place with fairly small lag screws.
My initial plan was to build a gate with four vertical and five horizontal pieces of 2x6 pressure treated lumber, with 4 hinges, the whole thing held together with coated Torx-head deck screws 3-1/2 inches in length. But when I got the initial frame assembled, I found it weighed a ton, and that was just 4 of the 9 boards. A quick Google search and some calculations gave a finished weight of over 175 pounds! Eliminating any of the horizontal boards would have left a large gap in the middle.
Then I noticed we had some wire frame panels. I picked through them and found there was one that almost perfectly matched the size of the frame. So I went with a frame of three vertical and three horizontal members, leaving four large holes. I then placed the wire panel over the middle and attached with with screws and metal strapping. I could have used staples like a normal person, but I prefer screws. The wire panel stuck up over the top of the gate by about 4 inches.
Some quick math and I came up with a finished weight of just 125 pounds, well within the 150 pound rating for each individual hinge. Because the gate had only 3 horizontal members, I could only use 3 hinges, but that's still way more than enough, and half again as much as the old gate.
Old gate hanging precariously behind the finished new gate.
I intentionally made the new gate slightly longer than the opening, so it would close against the posts on either side, which is much stronger than a gate that can swing either way. My initial plan was to have it open inwards, which would make it impossible for the animals to push it open, no matter how hard they hit it, but the ground was too uneven in the barnyard. So I had to hang it so it swung outwards. But this presented a new challenge, the hinges were now on the wrong side of the gate! The solution was simple, I just flipped the gate over. This placed the overhanging wire underneath the gate now, which led to my next problem.
I over-compensated for the wire and installed the hinges on the post too high, leaving a sizable gap underneath. While none of our current goats could get under it, it would be simple for baby goats, and the gap might encourage the dogs to try digging underneath. So I got some 1x4s and 1x2s from the garage and built another, lightweight frame underneath. I'm not sure what the 1x4s were, but the 1x2s are cedar. I held them in place with lots of screws.
Yes, the wire fence is distorted in one area, but it's cosmetic only and doesn't affect its structural integrity. It was the only piece that was the perfect size, anything else would have been too small or required extensive cutting.
The finished gate has 3 heavy-duty hinges attached to the gate with 5/8" carriage bolts and washers, and I put metal straps on the edges of the wood to prevent it from ever ripping out, the larger plates held in place with massive lag screws.
I would have preferred the gate open inwards, which would have made it nearly infinitely strong to resist animals inside the barnyard, so since it had to open outwards, I installed a heavy-duty latch. The loop goes through a 6x6 post and is secured with washers and nuts, while the hook end has 4 bolts, washers and nuts (I'm actually short one bolt at the moment, so it's only got a screw right now). The latch is self-locking and should be nearly impossible for the animals to manipulate with their horns. I may try getting a metal plate or something to reinforce the hook side. For now, this is the weakest point on the gate.
My roommate took one look at it and said, "I think you overengineered this."
Yeah, I do that.
